MW60 Miniature Three-Axis Dual-Light Stabilized Pod
1. Overview
The W60 gimbal uses a three-frame gyroscope stabilization control system with an embedded gimbal cable. It is equipped with a 10-megapixel visible light CMOS sensor and an infrared sensor, and has two field of view angles. It can output 1080P high-definition visible light video and infrared video in real time . At the same time, the gimbal component has target locking and tracking functions.
2. Frame corner
Azimuth: -90 ° to +90°;
Pitch angle: -120 ° to +90°;
Roll angle: -30 ° to +30°;
Stability accuracy: 0.02 ° (1σ, perturbation 0.5°@1Hz)
3. CMOS Imaging Sensor Specifications
1) Ten-million-level CMOS
Pixels: 13 million;
Focal length: 3.5mm;
Field of view: 70.4° (D) × 39.6° (V), error ±5%;
Distortion: ≤ 5%;
Depth of field: 1.69cm ~ I NF
Lens configuration: 5P + 1IR (650nm band)
Real-time video resolution: 1920×1080 ;
Maximum photo resolution: 4K, 1920×1080;
Recognition distance: Under visibility conditions of not less than 8km, the target recognition distance for adults is greater than 200m;
2) Infrared thermal imaging
Pixels: 256×192;
Focal length: 3.5mm;
Field of view: 30.9° (D), 17.4° (V);
Distortion: ≤ 0.7% ;
Lens configuration: 5P + 1IR;
Real-time video resolution: 1920×1080 ;
Maximum photo resolution: 256×192;
Recognition distance: Under visibility conditions of not less than 8km, the target recognition distance for adults is greater than 40m;
4. Power supply
DC9V～15V, steady-state power consumption 9W;
5. Weight and volume
The gimbal weighs approximately 60g and measures 44mm × 46mm × 60mm.
The tracking servo board weighs approximately 35g and measures 52mm × 52mm × 18mm.
The control box weighs approximately 20g (optional).
6. Output Interface
Video: Network, HDMI;
Control: TTL serial port, network, SBUS;
Storage: SD card storage;
7. Environmental adaptability requirements
Operating temperature: -40℃～+55℃;
Storage temperature: -45℃～+60℃;
Rain resistance: The system can operate normally under light rain conditions.
